Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14
K44 Duo Installation & User manual
Change codes
1
Press B and enter the current password.
2
Enter A22.
3
Enter the current code. If it is a 4-digit code,
enter A after the last digit.
4
Enter the new code using four or six digits.
5
Enter the new code once again.
6
Choose whether or not the code should be
disabled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
7
Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
8
Change the next code by continuing from step
3 or press B to leave code program
K44 Duo Installation & User manual
Set opening time
The opening time determines for how long the lock
should remain open following a correct entrance
code. When K44 Duo is delivered the opening
time is 7 seconds for both relays.
1
Press B and enter the current password.
2
Enter A28.
3
Enter the desired opening time (01-99) using
two digits, e.g. 09 for 9 seconds.
4
Choose which relay output the new opening
time applies to:
0 = both
1 = relay output 1
2 = relay output 2
Background lighting on/off
This is how to turn off the keypad's background
lighting, if needed.
1
Press B and enter the current password
2
Enter A60.
3
Enter 0.
To reactivate background lighting, press 1 in step
3 instead.
15
Publicité
Chapitres
Table des Matières
