Display Indication - Inventum IK010 Mode D'emploi

To set an additional cooking timer, proceed as follows:
• Select a different cooking zone.
• Adjust the power by means of the slider control
• Press the or key of the timer and set the required cooking time using the + and - keys. Next to the set power,
an extra LED (dot) lights up on the accompanying display. Now the timer is functioning as a cooking alarm.
• When the time is set, the display shows the time that will expire first (if several cooking zones have been programmed).
When the set time has expired, a beep signal sounds and the timer shows "_ _". The programmed cooking zone is switched
off and "H" appears on the display if the area of the cooking zone is hot.
The beep sound stops automatically after 30 seconds or after touching a random key.
SOUND SIGNAL
When the induction hob is being used, a sound signal can be heard in case of the following activities:
• normal key operation with short sound
• continuously touching keys for a longer of period of time (10 seconds) with a longer, interrupted sound signal.

DISPLAY INDICATION

Indication on the display
E/F
H
Lo
32
• English
A breakdown has occurred. Check the message using the table in section 7.
Residual heat indicator: the cooking zone is still warm.
The child lock is activated.
Error message. Place a suitable pan on the active cooking zone or switch off the cooking zone.
Something has been placed on the control or the cookware is unsuitable or too small.
.
Description