Rollei Actioncam 330 Guide Rapide page 12

UK
1. Inserting Micro SD Card
Note: Please choose branded Micro SD card and format it on computer before use .
Neutral cards are not guaranteed to work normally .
2. Installing and removing batteries
A Press on battery cap to open it .
B Correctly install battery into camera as indicated by +/- symbols and direction of
arrows marked on battery until it's in place .
C Battery Gauge: Please refer to diagram .
D Remove Battery: Open cap to take battery out .
3. Charging
A Charging can be done by either connecting the Actioncam to a computer or power
adaptor .
B Charge the Actioncam on vehicle by connecting it to car charger .
C The Actioncam can record video while charging (Switch into Vehicle-mounted Mode
in "Menu"
D Charging of the Actioncam can be done even when it's powered off .
4. Switching camera on and off
Press and hold power switch for 3 to 5 seconds to turn it on / off .
5. Mode Switching
Switch between video recording / photo shooting / playback / menu by pressing
"Power On-Off" button .
Recording mode, while
of screen .
settings .
12
photo shooting mode . Symbols are displayed on top
Refers to the function of video playback, and the last one is system