König Electronic KN-MICW440 Mode D'emploi page 7

Specifications:
Receiver
Frequency range
Frequency stability
Receiving sensitivity
Image and spurious rejection
Selectivity
Modulation
IF Frequency
Tone signal
S/N ratio
AF Response
T.H.D.
Power supply
Audio output
Current consumption
Microphone/Bodypack transmitter
Frequency range
RF Power output
Oscillator
Frequency stability
Maximum deviation
Spurious emission
T.H.D.
Microphone cartridge
Tone signal
Battery
Current consumption
UHF band 863~865MHz
± 0.005%
At 8 dBμV over 80dB S/N ratio
80 dB minimum
> 50dB
FM
1st: 243.95MHz; 2nd: 10.7MHz
32.768KHz
> 94dB, at 48KHz deviation and 60dBμV
antenna input
80Hz to 12KHz (±3dB)
Less than1.0% (at 1KHz)
DC 12V
Balanced and unbalanced outputs for
Single channel / Switching diversity
(Mic.=-20dB / Line = 0dB)
110mA
UHF band (863~865MHz)
10mW (max.)
PLL synthesized, 16Channel selectable
± 0.005%
± 48KHz with limiting compressor
> 60dB below carrier frequency
< 1% (at 1KHz)
Uni-directional electret condenser unit
32.768KHz
DC1.5V x 2 AA size dry or rechargeable
batteries NiMH batteries
110mA
7