AEG BSS 4818 Mode D'emploi page 52

English
52
NOTE:
• To ensure an optimal connection, make sure that the battery of your player is com-
pletely charged.
• Some of the mobile phone brands have an energy-saving mode. Deactivate the
energy-saving mode as it can otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to stay activated in your player.
Observe the operation manual of your player.
• If a mobile phone on which you are playing music receives a call, the music will be
interrupted. The sound however is not played back via the speaker.
Operation
The device is equipped with multi functional buttons. For different functions press the
respective button briefly or press and hold.
On/Off (3)
• Turn on the loudspeaker by pressing the
NOTE : Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected auto-
matically. The prerequisite for this is:
• The devices were already connected with each other.
• Bluetooth is activated in your player.
• Keep the / button pressed for approx. 3 seconds to turn off the loudspeaker
again. The units are disconnected.
NOTE:
To save the battery, switch off the speaker when not in use.
Pause (3)
• Briefly press the button to pause playback.
• Press the button again to continue playback.
NOTE:
Depending on the device manufacturers, models, and software versions you need to
start the music playback in your player.
/ button for 3 seconds.