Agu PMBF2 Mode D'emploi page 58

6. Fill the water container. The water temperature should be a few
degrees below the formula preparation temperature; otherwise, the
machine will be in a standby mode until the water cools. In this case, the
indicator of the button «Warm water» will flash. For correct operation
of the machine, use baby (bottled) boiled water at room temperature,
about 25 °C.
7. Install the water tank under the funnel.
8. Turn on the device.
9. Press the button
water should be poured from the water tank.
10. Click the «Connect» button in the application.
ATTENTION
Connection to the machine is possible only if there are no errors. Before
connecting, make sure that the button «Warm water» does not flash, but
constantly lights, otherwise repeat step 9.
11. Scan the bar code from the package. If everything is done correctly,
the display will show the formula temperature and the formula
preparation program. Now you can prepare the formula (see «Baby
formula preparation», page 60).
58
several times to fill the system with water. Spilt