System Settings - InnoCigs ESPION INFINITE AI Manuel D'utilisation

Table des Matières

Les langues disponibles

INNOCIGS ESPION INFINITE AI – SELECTING & OPERATING THE MENUS

System Settings

You can make further settings by selecting SET in the main menu:

Select the submenu item COIL to lock / unlock the resistor in TC / TCR mode.

Select the submenu item POWER to set the preferred power output in TC / TCR mode.

Select the submenu item STEALTH to switch the screen lock on or off. When turned on, the display is disabled during vaping.

Select the submenu item SUBPARA to specify whether the total number of puffs ("PUFF"), the total duration of vaping ("TIME") or the

electric current in ampere is displayed on the screen during normal operation.

Select the submenu item CLOCK to set the time and the date.

Select the submenu item PREHEAT to make settings for the preheat function. Set the power in watts under POWER and the duration in

seconds under DURATION.

Select the submenu item TIMEOUT. The TIMEOUT function will make the device shut down automatically after a determined maximum

puff duration. After that, press the fire button five times to restart the device. Under the TIMEOUT button you can set the time for

maximum puff duration (5s / 10s / 15s). If the timeout function is deactivated the automatic shutdown will happen after ten seconds.

Select the submenu item INFO to display the recent software version.

Table des Matières

Table des Matières