Installation Of The Antenna Guide Before Use - Jay Electronique ISIS Notice Technique D'installation Et D'utilisation

11.7- Installation of the antenna guide before use

1. Open the housing and unscrew the spiral nut used to secure the
antenna
2. Insert the antenna wire in the guide
3. Slide the guide into the spiral nut, then fully into the cable gland
base upto the limit in the base
STOP
4. Tighten the spiral nut to the sticking point, then add a quarter turn
to lock the antenna guide and ensure tightness of the assembly.
Check that the guide is securely mounted. Check that the antenna
entered at most the guide to allow an optimal reception
ISIS - 331260D
Spiral nut
revision02
Antenna wire
Guide
DE EN FR
- 99 -