Display Of Receiver/Receiver Module Identity Code - Jay Electronique ISIS Notice Technique D'installation Et D'utilisation

6.4- Display of receiver/receiver module identity code

This procedure is used to determine the identity code used by the
receiver or tranceiver receiver module.
Receiver ISRA
or transceiver
receiver module
IST
Receiver ISRS
Step
1
Switch off the receiver or the transceiver
Insert jumpers JP2 and JP3
2
Then, switch on the receiver or
the transceiver
The identity code is displayed by indicator lights V2 and V3
The identity code is encoded on 8 bits.
3
V2 indicates the 0 position
V3 indicates the 1 position
For each flash of V2 or V3 record the « 0 » or « 1 » position of
the 8 bits of the identity code.
Example :
V2
Identity code : 00111010
Switch off the receiver/transceiver
4
Remove jumpers JP2 and JP3
FR
- 76 -
RM R1 R2 R3
4 5 6 7 8 9 10 11 12 13
V1 V2
JP1
RM R1 R2
1 2 3 4 5 6 7 8 9 10 11 12 13
Actions and states of receiver/receiver module
V2 V3
EN DE
V1 V2 V3 JP1 JP2 JP3
R4 R5 R6 R7 R8
14 15 16 17 18 19 20 21
V3
JP2 JP3
R3 R4
indicator lights
V3 V3
V1 V2 V3
V1 V2 V3
JP1 JP2 JP3
JP1 JP2 JP3
V2 V3
JP1 JP2 JP3
ISIS - 331260D
JP2 JP3
JP1
V1
V2
revision02