Electrical Connection; Startup; Checking The Delivery Contents - Beem Schneid-FiXX Superior Mode D'emploi

EN

Electrical connection

For safe and trouble-free operation of the
appliance, the following instructions on
the electrical connection must be be ob-
served:
■ Before connecting the appliance,
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. This
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
■ The mains socket must be protected
by at least a 16 A automatic circuit
breaker.
■ Ensure that the mains cable is undam-
aged and is not laid over hot surfaces
or sharp edges.
■ The connecting cable must not be
strained or bent.
■ Always unwind the mains cable com-
pletely before connecting the appliance
to the mains socket.
■ The electrical safety of the appliance
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
BEEM - Elements of Lifestyle
Schneid-FiXX Superior

Startup

Unpacking
Remove the appliance, all accessory
‹
parts and the user manual from the
box.
Remove all packaging materials and
‹
protective foils from the product and
the accessories before using it for the
first time.
NOTE
► Never remove the rating plate or any
warning signs on the appliance.
► Keep the original packaging during
the warranty or guarantee period in
order to return the appliance in the
packaging in the event of a warranty
or guarantee claim. Transport dam-
age will invalidate the warranty or
guarantee.

Checking the delivery contents

Check for visible signs of damage or miss-
ing items.
Report incomplete or damaged contents to
your supplier immediately.
Before using for the first time
Clean the appliance and the accessories
as described in the section Cleaning and
maintenance (page 18).
NOTE
► When using for the first time, it is
possible that production-related
additives such as grease could
cause slight odour or smoke. This is
completely normal. Ensure sufficient
ventilation.
15