Connection; Connecting The Ic6-St - Martin Logan Installer IC 3 Guide De L'utilisateur

ALL MODELS EXCEPT "IC6 ST"
2 SPEAKER STEREO SETUP
L
L
-
+
Fig. 4a: Wiring for 2-channel stereo sound.
2 SPEAKER STEREO SETUP
L
L
-
+
Fig. 4b: Wiring for 2-channel stereo sound
from a single speaker.
1 SPEAKER STEREO SETUP
L
-
+
Fig. 4c: Bridging left and right inputs to wire
for single channel with wide dispersion.
RECEIVER / R
AMPLIFIER
R
+
-
RECEIVER /
R
AMPLIFIER
R
+ - +
- +
-
RECEIVER /
R
AMPLIFIER
R
L
+
-

Connection

Connect the red (+) amplifier terminal to the
red (+) speaker terminal. Connect the black (-)
amplifier terminal to the black (-) speaker terminal.
Fasten cable to bracket with wire tie (Fig. 4a).

Connecting the IC6-ST

2-channels from a single speaker: Connect
two sets of speaker cables from your amplifier to
the left and right inputs on the IC6-ST (Fig. 4b).
Single channel, wide dispersion: Connect
one set of speaker cables to one set of bind-
ing posts on the IC6-ST and use matching
cable to bridge the second set of binding
posts (Fig. 4c).
9