Honeywell HCM-3060 Série Guide D'utilisation page 5

OPERATION
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• With the Power knob in the OFF position, plug the filled humidifier into a polarized 120V
outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
H U M I D I T Y C O N T R O L
1. Set the dial to the desired position. (Fig. 4).
HIGH: For fast humidifying
NORMAL: For everyday moisture control
LOW: For quieter nighttime operation
2. Set the Moisture Control knob on HIGH, by turning the dial clockwise
raindrop ( ). (Fig. 4).
Fig. 4
NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Moisture
Control may be set too low. Turn the dial clockwise
High. The Desired Humidity Light will be Off when the unit is producing
moisture (Fig. 4).
Moisture Control
to the largest raindrop (
to the largest
) before