Transporting The Work Platform; Preparation For Shipment; Lifting By Crane; By Forklift - Upright X Série Guide De L'opérateur

Transporting the Work Platform

T
RANSPORTING THE
P
R E P A R A T I O N F O R
1. Fully lower the platform.
2. Disconnect the battery negative (-) lead from the battery terminal.
3. Band the controller to the front guardrail.
4. Band the elevating linkage to the frame.
L
I F T I N G
1. Secure straps to chassis tie down/lifting lugs only.
2. Place the platform onto the transport vehicle in transport position.
3. Chock the wheels.
4. Secure the work platform to the transport vehicle with chains or straps
of adequate load capacity attached to the chassis tie down/lifting lugs.
B F
Y O R K L I F T
D A N G E R
!
Forklifting is for transport only.
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
the work platform.
Forklift from the rear of the machine using the forklift pockets provided. If necessary, the machine may be
forklifted from the side by lifting under the Chassis Modules.
D
R I V I N G O R
T
R U C K O R
NOTE: Do not winch faster than 0,3 m/s (1 ft/s) .
1. Move the machine onto the truck or trailer;
A. To Drive the machine onto the transport vehicle:
a. Move the work platform up the ramp and into
transport position.
b. Set the wheels straight and turn off the machine.
c. Chock the wheels.
B. To Winch the machine onto the transport vehicle:
a. Move the work platform up to the ramp.
b. Attach the winch cable to the tie down/lifting lugs.
c. Release the parking brakes (refer to "Towing or
Winching" on page 12).
d. Winch the platform into transport position
e. Chock the wheels.
2. Secure the work platform to the transport vehicle
with chains or straps of adequate load capacity
attached to the chassis tie down/lifting lugs.
C A U T I O N
Overtightening of the chains or straps attached to the
Tie Down/Lifting Lugs may result in damage to work platform.
Operation Manual
W P
ORK
S
H I P M E N T
B C
Y R A N E
!
W
I N C H I N G O N T O A
T
R A I L E R
LATFORM
Forklift Pockets
Lift Lugs
Front Tie Down Lugs
060572-025 X Series
Figure 7: Secure Crane Straps
Figure 8: Transporting the Work Platform
Rear Tie Down/Lift Lugs
REAR
FRONT
Page 13