Port Configuration; Installing Drain Line - Fantech SHR 8005R Mode D'emploi

6

Port configuration

The unit has access doors on the front and back. Also, the main control panel may be moved from front to back allowing for ducting layout.
Outdoor or Recirculated air
Outdoor or Recirculated Air
Factory Setting. Unit may be easily reversed
Standard Configuration as shipped from factory.
in field.

Installing Drain Line

Through normal operation and including defrost mode, the HRV may produce some condensation. This water should flow into a nearby drain, or be taken
away by a condensate pump. The HRV and all condensate lines must be installed in a space where the temperature is maintained above freezing point. A
"P" trap should be made in the drain line. This will prevent odors from being drawn back up into the unit.
Install the drain hose, making a "P" trap
fantech
Indoor Air
Indoor Air
Indoor Air
Tee
Connector
Tape
or Tie Wrap
Indoor Air
Outdoor or Recirculated air
Drain
Spout
The water should be
drained back into the
pool and not wasted
Outdoor or Recirculated Air