FAR ELEK 112508 Guide D'utilisation page 38

GB
HOT AIR EVACUATION
INSTALLATION OF THE FLEXIBLE HOSE FOR AIR EVACUATION
1)Fix the square end piece of the hose on the rear evacuation terminal of the air
conditioner. To fix the hose correctly, you must keep it horizontal relative to the unit.
2) Set the other end of the hose in the closest window.
Warning
: During installation, keep the hose horizontal relative to the unit.
Correct installation is shown below. If you install the air hose in a wall or a window,
respect the dimensions: 40 cm from the ground and 130 cm maximum height rela-
tive to the ground.
note : The kit fenestrates delivered with apparatus makes it possible to preserve am-
bient fresh air. It is placed on any window at slide.
© FAR GROUP EUROPE 2004
112508-509-B.indd 38 21/03/05 10:41:00