FAR ELEK 112508 Guide D'utilisation page 37

REMOTE CONTROL DESCRIPTION
1
: Indicates the automatic mode.
2
: Indicates the COOLING function.
3
: Indicates the «dry» dehumidification mode.
4
: Indicates the fan mode.
5
: Indicates the temperature or time.
6
: This arrow indicates the present operating mode.
7
: Indicates that the fan is in automatic mode.
8
: Indicates that the fan is in the highest power position. «high»
9
: Indicates that the fan is adjusted to the intermediate «medium» power
position
10
: Indicates that the fan is adjusted to the lowest «low» power position
11
: ADJUST: this button acts to adjust the ambient temperature. Press once
on the right and the temperature will rise by 1°C, press once on the left and
the temperature will fall by 1°C.
12
: MODE button: Each time you press this button, you change the function
mode of the unit. In the following order: automatic cooling, fan, dry.
13
: AIR FLOW button: this button changes the orientation of the shutters
directing the airflow.
14
: «ON/OFF»
15
: SPEED button for the airflow: by pressing this button you adjust the
automatic ventilation power; high, medium, low.
16
: SLEEP button: this button puts the unit into sleep mode.
17
: TIMER: For setting the operating time of the unit. By pressing, you
reduce the operating time.
18
: TIMER: For setting the operating time of the unit. By pressing, you in-
crease the operating time.
112508-509-B.indd 37
© FAR GROUP EUROPE 2004
GB
21/03/05 10:40:59