Ventilation Mode - FAR ELEK 112508 Guide D'utilisation

GB
USE
COLD Mode
1.Check that the emptying tank is placed correctly in the unit.
2. Install the flexible evacuation pipe correctly. During the cooling operation the flexi-
ble evacuation pipe must always be placed in an open window or an orifice leading
outside, and made for this purpose, so as to evacuate hot air from the room.
3. Press several times on the «mode» button until the cold/cool mode appears in the
liquid crystal display window.
4. Press several times on the temperature programming button to indicate the appro-
priate ambient temperature between 16°C and 30°C.
5. Press the «ventilation speed» button to choose an appropriate speed for the fan;
high, medium or low speed.
Note : In order to improve cooling efficiency, check:
a) that the room is not exposed directly to the sun (It suffices to close the curtains) .
b) that the unit is not placed next to another heat source.
MODE DEHUMIDIFICATION MODE
1. For efficient dehumidification of the room, keep the doors and windows closed.
2. Ensure that the emptying tank is placed correctly in the unit.
3. Press several times on the «mode» button to choose dehumidification mode. With
this operating mode, you cannot adjust the ventilation speed.
4. Only in this operating mode, the flexible pipe for air evacuation must not be instal-
led.

VENTILATION MODE

1. Press several times on the «mode» button to choose ventilation mode. In the
liquid crystal display window a revolving helix will appear.
2. Press the button for adjusting the ventilation speed to determine your choice;
high, medium or low.
© FAR GROUP EUROPE 2004
112508-509-B.indd 33 21/03/05 10:40:58