NORAUTO 2271068 Mode D'emploi page 51

coiled as this may cause overheating. Do not bend,
stretch or pull the supply cable in order to avoid
electric shock.
18 Ensure the rated voltage shown on the rating label
corresponds with the voltage of the power supply.
19 Connect the mains plug to an easily accessible
socket, in order to quickly disconnect the appliance
from the mains supply in an emergency.
20 NEVER pull the plugs out of sockets using the
cable, or pull on the cables to manoeuvre the
device.
21 To disconnect the device from the mains, remove
the plug completely by pulling the plug.
22 CAUTION: Do not open the housing under any
circumstances. Do not insert fingers or foreign
objects in any opening of the appliance and do
not obstruct the air vents. The unit should have
good ventilation. Do not run the cooling device in
a closed compartment such as a car boot. The
ventilation slots shall be kept clear for the unit to
work properly and prevent dangerous overheating.
Do not cover the appliance.
23 When used in high ambient temperature or
humidity, condensation may collect inside the unit.
Wipe dry with a suitable cloth.
24 NEVER fill the unit with water or ice. DO NOT
immerse the unit in water. Do not touch with wet
hands. Do not use near water.
25 DO NOT place the cooler in direct sunlight or
enclosed space where ventilation is restricted, or
where there are other heat sources.
26 Do not expose to rain, wet and damp conditions.
27 Do not operate the cooling device if it is visibly
damaged.
28 Disconnect the unit while the vehicle's engine is
not running to prevent the vehicle battery from
becoming excessively drained or flat. When the
vehicle is running, the alternator should provide
enough power.
29 To maximise the cooling effect after the unit is
EN
51