Automatic Icemaker; Turning The Automatic Icemaker On Or Off - LG LFX29945ST Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

30
HOW TO USE

Automatic Icemaker

(Ice Room)
* Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and sent
to the dispenser. The icemaker will produce
70~210 cubes in a 24-hour period, depending
on freezer compartment temperature, room
temperature, number of door openings and
other operating conditions.
It takes about 12 to 24 hours for a newly
installed refrigerator to begin making ice. Wait
72 hours for full ice production to occur.
Ice making stops when the in-door ice bin
is full. When full, the in-door ice bin holds
approximately 6 to 8 (12-16 oz) glasses of ice.
The water pressure must be between 20 and
120 psi on models without a water filter and
between 40 and 120 psi on models with a
water filter to produce the normal amount and
size of ice cubes.
Foreign substances or frost on the ice-
detecting sensor can interrupt ice production.
Make sure the sensor area is clean at all times
for proper operation.
Icemaker
Power
Switch
Ice-detecting
Sensor
Turning the Automatic Icemaker
On or Off
To turn off the automatic icemaker, set the
icemaker switch to OFF (O). To turn on the
automatic icemaker, set the switch to ON (I).
Automatic Icemaker
(Freezer Room)
* Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and sent
to the dispenser. The icemaker will produce
12 cubes per cycle—approximately 100 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other operating
conditions.
It takes about 12 to 24 hours for a newly
installed refrigerator to begin making ice.
The water pressure must be between 20 and
120 psi on models without a water filter and
between 40 and 120 psi on models with a
water filter to produce the normal amount and
size of ice cubes.
Foreign substances or frost on the ice-
detecting sensor can interrupt ice production.
Make sure the sensor area is clean at all times
for proper operation.
Automatic
Shut Off Arm
Turning the Automatic Icemaker
On or Off
To turn off the automatic icemaker, set the
icemaker switch to OFF (O). To turn on the
automatic icemaker, set the switch to ON (I).
Power Switch

Publicité

Table des Matières
loading

Table des Matières