Stereo Mode - Krüger & Matz KM0521S Mode D'emploi

• Charging continues even if the speaker is turned off.
• When the battery is low, Charging indicator flashes red.

STEREO MODE

1. Pair one of the speakers with the external device (see "Bluetooth
mode – Pairing"). That speaker will be the master speaker.
2. Turn on the second speaker (press and hold the Power button).
3. Press and hold the Mode button simultaneously on both
speakers for about 2 seconds; the speakers will issue a sound
and L/R indicators on both speakers will flash.
4. After a few seconds, the speakers will issue a sound signifying
that they have connected with each other. Stereo mode is
enabled. You are now able to play audio in stereo using your
mobile device.
5. The speaker connected with an external device is the master
speaker (left channel speaker) with L indicator on; the other
speaker is the slave speaker (right channel speaker) with R
indicator on.
Notes:
• For an optimal performance, position the speakers within 10
meters from each other, make sure there are no obstructions
between them and that the distance between both speakers
is equal.
24
Owner's manual