Aux Mode; Bluetooth Mode - Krüger & Matz DISCOVERY KM0523 Mode D'emploi

oPeration
Turning on/off:
press and hold the power button for about 4 seconds to turn on the speaker. press and
hold the power button for about 2 seconds to turn off the speaker. press and hold the
power button for 8 seconds to restart the speaker.
Answering/Rejecting/Ending a call:
press the phone button to answer an incoming call. press and hold the phone button to
reject/end a call. press the phone button to answer a second incoming call.
Music Play/Pause:
While playing music, press button to play/pause music playback.
Volume adjustment:
press V+ button to increase volume. press V- button to decrease volume.
Music selection:
press button to go to the next track. press and hold this button to fast-forward. press
button to go to the previous track. press and hold this button to rewind.

bluetooth Mode

pairing:
1. press the power button to turn on the speaker. It will automatically enter Bluetooth mode.
8
2. please keep the speaker and external device close to each other when pairing.
3. press and hold button to enter pairing mode. The speaker will issue a voice prompt.
4. Enable the Bluetooth function on the external device and search for new Bluetooth devices.
5. Select and connect with this device (kM Discovery). Enter password: "0000" if necessary.
6. The speaker will issue a sound signifying successful pairing.
Note:
• If pairing is not completed within 3 minutes, the speaker will quit the pairing mode. In
that case, repeat pairing process to pair the speaker with external device.
• Every time the speaker is switched on, it will connect to last connected device
automatically. please note, your device must be on with Bluetooth function turned on.

auX Mode

1. Use 3,5 mm AUX cable and connect one end of the cable into the speaker's 3,5 mm input.
2. The speaker will automatically enter AUX mode.
3. Connect the other end into the 3,5 mm input of the device you wish to play music from.
4. Start playing music from your device.
MicroSd Mode
1. Insert microSD card into the slot.
2. The speaker will automatically enter microSD mode.
Owner's manual