Stereo Mode; Led Indicators - Krüger & Matz Solo XL Mode D'emploi

STEREO MODE

1. Pair one of the speakers with the external device (see "Bluetooth mode
– Pairing"). That speaker will be the master speaker.
2. Turn on the second speaker (press and hold the Power button).
3. Press the Bluetooth button twice on both speakers to pair them; the
speakers will issue a sound.
4. After a few seconds, the speakers will issue a sound signifying that they
have connected with each other. Stereo mode is enabled. You are now
able to play audio in stereo using your mobile device.
5. Bluetooth indicator of the master speaker (left channel speaker) flashes
blue slowly; Bluetooth indicator of the slave speaker (right channel
speaker) is blue.
Notes:
• For an optimal performance, position the speakers within 10 meters
from each other, make sure there are no obstructions between them
and that the distance between both speakers is equal.
• Every time the speakers are switched on, they will connect to each other
automatically.
• To disconnect the speakers and quit stereo mode, press and hold – and
+ buttons simultaneously on one of the speakers. Speaker pairing list
will be cleared.
• Master speaker pairs with external devices and should be used for other
modes. Slave speaker can only pair with the master speaker.

LED INDICATORS

LED indicator
(Bluetooth
button)
LED indicator
(Power button)
14
Indicator activity
Solid blue
Blue flashing quickly
Blue flashing twice
every 3 seconds
Solid blue
Solid red
Owner's manual
System state
Speaker is on
Bluetooth pairing mode
Bluetooth connection
established
AUX mode
Charging