Bluetooth Mode - Krüger & Matz Solo XL Mode D'emploi

Play/pause music
While playing music, press the Multifunctional button to play/pause music.
Volume adjustment
Press the – button to decrease volume (each press decreases volume by
one level). Press and hold – button to decrease volume continuously.
Press the + button to increase volume (each press increases volume by one
level). Press and hold + button to increase volume continuously.
Track selection
Track selection (previous/next track) is controlled by the external device in
Bluetooth and AUX mode.

BLUETOOTH MODE

Pairing:
1. Make sure the speaker is turned on.
2. Press and hold the Bluetooth button for about 2 seconds to enter Bluetooth
pairing mode; the speaker will issue a voice prompt and the LED indicator
will flash blue quickly.
3. Please keep the speaker and external device close to each other when
pairing.
4. Enable Bluetooth function on the external device and search for new
Bluetooth devices.
5. Select and connect with this device (KM Solo XL). Enter password "0000" if
necessary.
6. The speaker will issue a voice prompt signifying a successful pairing; a blue
LED indicator will flash twice quickly every 3 seconds.
Notes:
• If pairing is not completed within 2 minutes, the speaker will quit the
pairing mode. In that case, repeat pairing process to pair the speaker
with external device.
• Every time the speaker is switched on, it will connect to last connected
device automatically. Please note, your device must be on with Bluetooth
function turned on.
• Press and hold – and + buttons simultaneously to clear the speaker
pairing list; successful operation will be signified by a sound.
• When playing music from external device, Bluetooth mode is always
given a priority.
• Incoming call will override music playback. Press the Multifunctional
button to answer/end a call; press and hold that button to reject a call.
12
Owner's manual