Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
What is
Included
AC Power
Power Linking
AC Plug
Replacing the
Fuse
DMX Linking
DMX Connection
·
Legend™ 412Z
·
Neutrik® powerCON® power
cord
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 9 Legend™ 412Z products at 120 VAC, 15 at 208 VAC, or
17 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
Connection
AC Live
AC Neutral
AC Ground
1.
Disconnect this product from power.
2.
Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3.
Remove blown fuse and replace with a fuse of the same type and
rating.
4.
Screw the fuse holder cap back in place and reconnect power.
The Legend™ 412Z will work with a DMX controller using a regular DMX
serial connection. A DMX Primer is available from www.chauvetpro.com.
The Legend™ 412Z uses a regular DMX data connection for its DMX
personalities: 15chan, 27chan, 31chan, and 34chan. See the User Manual to
connect and configure for DMX operation.
·
·
·
Wire (U.S.)
Wire (Europe)
Black
White
Green/Yellow
Green/Yellow
3
Legend™ 412Z QRG
Omega bracket with mounting
hardware
Warranty Card
Quick Reference Guide
Screw Color
Brown
Yellow/Brass
Blue
Silver
Green
Publicité
Table des Matières
