Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
18
MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the TV and switch input modes to select an external device. For more
information about an external device's connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC,
camcorders or cameras, gaming devices, and other external devices.
NOTE
If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
y
y
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the
manual supplied with the connected device.
The external device connection may differ from the model.
y
y
Connect external devices to the TV regardless of the order of the TV port.
y
y
Connecting an antenna
Connect an antenna, cable, or cable box to watch TV referring to the following. The illustrations may differ
from the actual accessories and an RF cable is optional.
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
Wall Antenna Socket
NOTE
Use a signal splitter to use more than 2 TVs.
y
y
If the image quality is poor, install a signal
y
y
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
y
y
connected, aim the antenna to the proper
direction.
Visit http://AntennaWeb.org for more
y
y
information about the antenna and cable
connection.
(Not Provided)
CAUTION
Make sure not to bend the copper wire of
y
y
the RF cable.
Copper wire
Complete all connections instructions
y
y
between devices, and then connect the
power cord to the power outlet to prevent
damage to your TV.
Outdoor Antenna
VHF Antenna
y
y
UHF Antenna
y
y
Publicité
Chapitres
Table des Matières
Dépannage
