Mitsubishi Electric CITY MULTI PKFY-P-VKM-E Série Manuel D'utilisation page 15

Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
Main Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
Main display:
Cursor Page
F1 F2 F3 F4
Filter information
Please clean the filter.
Press Reset button after
filter cleaning.
Main menu:
Reset
F1 F2 F3 F4
Filter information
Reset filter sign?
Cancel OK
F1 F2 F3 F4
Filter information
Filter sign reset
Main menu:
Navigating through the screens
To go back to the Main menu ................ [MENU] button
To return to the previous screen ........... [RETURN] button
will appear on the Main display
in the Full mode when it is time to
Select "Filter information" from the
Main menu (refer to page 8), and
press the [SELECT] button.
sign.
Refer to the indoor unit Instructions
Select "OK" with the [F4] button.
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
If two or more indoor units are connected, filter cleaning timing for
each unit may be different, depending on the filter type.
The icon will appear when the filter on the main unit is due for
cleaning.
When the filter sign is reset, the cumulative operation time of all units
will be reset.
The icon is scheduled to appear after a certain duration of
operation, based on the premise that the indoor units are installed in a
space with ordinary air quality. Depending on the air quality, the filter
may require more frequent cleaning.
The cumulative time at which filter needs cleaning depends on the
model.
This indication is not available for wireless remote controller.
cleaner, tap the filters against a solid object to knock off dirt and dust.
care to rinse off any detergent thoroughly and allow the filters to dry
completely before putting them back into the unit.
When the is displayed on the
Main display in the Full mode, the
system is centrally controlled and
15