Installation; Handling; Cleaning; Demolition And Disposal - Ferrari 2 FPF Manuel D'utilisation

GB PALLETT FORKS

6. INSTALLATION

6.1 Handling

For lifting and transporting, use means
adequate to the weight to be moved.
To ensure safe transport, the equipment must be
securely fastened onto a pallet.
Lifting is carried out together with the pallet using
a lift truck or by harnessing as shown in the figure,
providing belts with a suitable capacity.
See the weight of the components indicated
in Chapter 5 - Technical Characteristics.
Move the load by lifting it very slowly in order not to
create sudden movements that could give rise to
dangerous situations.
The personnel assigned to moving and
handling must wear: protective gloves, hard
hat, and safety shoes with steel toe and
non-skid sole.
20
Models Capacity Weight
kg kg
FPF 20A 2000 175
According to EN 2006 42 EC

6.2 Cleaning

6.3 Demolition and disposal

Elements in plastic:
must be removed and disposed of separately.
Lubricants:
must be collected and taken to the dedicated collection
centres.
Elements in carbon steel:
must be recycled through the dedicated collection
centres.
T E C H N O L O G Y M A D E I N I T A L Y
A B C
mm mm mm
1060 1100 1650
Make sure that all personnel are outside
the range of action of the lift truck during
the operations of lifting, transport, and
handling.
Do not stand below suspended loads
The equipment can be cleaned by
personnel who do not have specific
technical skills, but they must be
informed beforehand of the need to
perform this operation only when the
machine is stopped in order not to cause
dangerous situations.
Before proceeding to the demolition of
the equipment, it is mandatory to
eliminate and dispose of all the parts that
may be harmful to the environment,
according to the local laws and
regulations.
D b x h
mm mm
950 130 x 35