Warnings, Prohibitions And Instructions; Introduction; Safety Rules - Ferrari 2 FPF Manuel D'utilisation

GB PALLETT FORKS

2.4 Warnings, prohibitions and instructions

Before using the equipment, verify the presence of the
adhesive labels according to the diagram below.
SYMBOL MEANING
Prohibited to
clean, lubricate,
adjust or repair
with machine
running
Danger of
crushing
It is prohibited for the user to remove the
adhesive labels.

2.5 Introduction

FERRARI INTERNATIONAL 2 SpA would like to
thank you for the confidence you have shown in us by
choosing one of our products.
Continuous improvement and the search for the
most qualified products are the basis of our work. We
therefore reserve the right to make any modifications to
our equipment that we consider opportune, also without
prior notice, and without such modifications being
applied to machines sold beforehand.
In the event that the equipment is to be used in
particular conditions or for types of use different from
those which we have stated, we recommend that you
consult with our technical department.
The illustrations contained in this manual
refer to the standard model. The models
purchased may differ in certain particulars,
mainly due to the need for adaptation on
specific machinery and/or other equipment.
2.6 Norme di sicurezza
POSITION
On the
machine
On the
machine
It is strictly prohibited to use the equipment before
having blocked access to the work area by persons
and animals; for this purpose it is necessary to enclose
the work area and to adopt any appropriate measures
to make all the work operations safe.
All the safety rules prescribed for the machine are also
valid for the equipment; if there is any discrepancy
between the safety rules of the machine and those
of the equipment, the most restrictive rules must be
applied.
The equipment is suitable for lifting and moving
materials; therefore, it is strictly prohibited to move the
load above persons or work stations.
Compliance of the equipment with the machine
directive is valid only if the machine on which it is
installed also complies with this directive.
Any servicing on the equipment must be carried out
with the machine stopped in a stable position.
The safety of the equipment is tied to the efficiency
of the safety systems of the machine on which it is
installed.
T E C H N O L O G Y M A D E I N I T A L Y
It is strictly prohibited to pass
within the range of action of the
machine and the equipment.
Danger of suspended loads
Danger of crushing
Danger of entanglement
17