Cancelling The Memory Process; Displaying Messages; Displaying The Banner Message (Basic Adjustment); Displaying The Message Of A Memory Location M0 To M9 - IMG STAGELINE PML-80R Mode D'emploi

exceeded, "Memory full" will be displayed after
pressing the corresponding memory keys.
6) Approx. 25 s after memorizing, the unit will automatically go
to the mode "BANNER".

4.1.1 Cancelling the memory process

To stop the memory process at any time, press the key CAN-
CEL (4). After an interval of approx. 25 s, the unit will go to the
mode "BANNER".

4.2 Displaying messages

4.2.1 Displaying the BANNER message (basic adjustment)

Until another mode is called, the message light is always auto-
matically set to the mode "BANNER". In the mode "BANNER",
the message memorized as a BANNER message (see chapter
4.1, item 5b) will be displayed continuously at short intervals.
4.2.2 Displaying the message of a memory location M0
to M9
To call a message memorized under one of the memory loca-
tions M0 to M9, press the corresponding memory key M0 to
M9 (16). The message will be displayed once. After approx.
25 s, the unit will automatically return to the mode "BANNER".
With the key CANCEL (4), the display can be stopped at
any time. After approx. 25 s, the unit will return to the mode
"BANNER".

4.2.3 Displaying a preprogrammed message

To call one of the 99 messages from the LIBRARY data
bank (see table on pages 56 to 57), first press the key LI-
BRARY (11), then the two corresponding numerical keys (5)
[e. g. for message No. 7, first press the key "0", then the key
"7"]. The selected message will be displayed once. After ap-
prox. 25 s, the unit will automatically return to the mode "BAN-
NER".
To stop the display of the message at any time, press the
key CANCEL (4). After an interval of approx. 25 s, the unit will
return to the mode "BANNER".

4.2.4 Continuous display of a message in rapid succession

Each message can be set to continuous display in rapid suc-
cession. Press the key ONLY (15) during or after the display of
a memorized message or preprogrammed message from the
LIBRARY data bank. The message will then be displayed con-
tinuously in rapid succession. It is also possible to switch a
message to this mode which has just been entered and not yet
memorized: after entering the message, press the key PLAY
(20) and then the key ONLY.
GB
15