Domo Piet Huysentwyt DO9055C Mode D'emploi page 31

ASSEMBLING AND DISASSEMBLING THE BAKING PLATES
Before assembling or disassembling anything, unplug the snack maker and wait
until the appliance has cooled down completely.
caution: do not let the baking plates come into contact with any metal cutlery or other
metal objects to avoid damaging of the anti-stick coating.
• Place the appliance on a flat and stable surface.
• if necessary, clean the baking plates with a damp cloth.
• assemble the baking plates you want to use. this is how you do the assembling:
10. locking pin
11. hole
12. locking plate
13. hinge
14. Slot
Place the 2 locking plates at the bottom of the top baking plate in the top slots of the
hinges of the appliance. make sure that the locking pin clicks into place in the hole at
the top of the appliance. Push against the baking plate so that it locks into place.
Place the 2 locking plates at the top of the bottom baking plate in the bottom slots of
the hinges of the appliance. make sure that the locking pin clicks into place in the hole
at the front of the appliance. Push on the baking plate so that it locks into place.
to remove the baking plates, press the buttons on the sides of the appliance. this will
release the baking plates. to remove the top plate, press the left button. to remove the
bottom plate, press the right button.
USING THE SNACK MAKER
Caution: never use the appliance with only 1 baking plate. Always make sure that
the 2 baking plates are assembled correctly.
1. You can smear in the baking plates with a little vegetable oil to make sure that
you will be able to easily remove any food remains after baking.
2. close the lid with the handle.
11
10
31
DO9055C
12
14
13