LENCO DVP-1200T Manuel Utilisateur page 32

Table des Matières

Publicité

Plug the AV output from your game system into the AV IN
jack on the front of the unit. You can use the attached AV
cable to convert the 3.5mm AV jack on the unit to RCA type
AV jacks, and match the color-coded jacks to the appropriate
plugs:
Yellow (VIDEO) to Yellow, white (AUDIO L) to White, and
Red (AUDIO R) to Red Select the AV mode and adjust the
volume / picture control to individual preference.
L. Use Headphones
1.
IR Hi-Fi headphones may be used with the
Wireless
system. Simply place batteries in the wireless
headphones and power them up. Make sure there is a
clear line of site to the IR Headphone Sensor.
2. Optional wired Hi-Fi headphones may be used with the
system. Simply plug in the headphone to either
headphone jack on the front of the unit. When using the
right headphone jack both internal speakers will be turned
off.
M. Support Home TV
Match the color-coded plugs to the appropriate DVD outputs
in the rear of the unit: Yellow (VIDEO) to Yellow, White
(AUDIO L) to White, and Red (AUDIO R) to Red.
N. Support External Speaker
Connect the EXT. SPEAKER output to an external speaker.
O. Specifications
31

Publicité

Table des Matières
loading

Table des Matières