Wireless Network Connection; Wireless Communication; Wireless Network Setup - Pioneer BCS-SB616 Mode D'emploi

Wireless Network Connection

Another connection option is to use an Access Point
or a wireless router. The network coniguration and
connection method may vary depending on the
equipment in use and the network environment.
This player is equipped with an IEEE 802.11n (Dual-
band, 5 GHz and 2.4 GHz band) wireless module,
which also supports the 802.11a/b/g standards.
For the best wireless performance, we recommend
using a IEEE 802.11n certiied Wi-Fi network (access
point or wireless router).
Wireless
Communication
Access Point or
Wireless Router
Broadband
service
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network's router or
cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be afected by other
electronic devices in the home.
VOLUME
PORTABLE IN
5 V 500 mA
PC and/or
DLNA certiied server
,
Note
Available frequency range and channels for
5 GHz band are listed as below. But, there
may have the diferences and restrictions
depending on the country. Try setting your
access point with other channel if you have
diiculties in wireless network connection.
Area Frequency Range
North 5.15-5.25 GHz (ch. 36-48),
America 5.725-5.825 GHz (ch. 149-161),
5.825- 5.850 (ch.165)
Europe, UAE 5.15-5.25 GHz (ch. 36-48)
Others 5.15-5.25 GHz (ch. 36-48),
5.725-5.825 GHz (ch. 149-161),
5.825- 5.850 (ch.165)

Wireless Network Setup

For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
Preparation
Before setting the wireless network, you need to:
- connect the broadband internet to the wireless
home network.
- set the access point or wireless router.
- note the SSID and security code of the network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
Connecting
33
2