Beko MAT 13 Instructions De Montage Et De Service page 8

Installation • Instalación
Installation • Instalação
wrong • no correcto
incorrect • incorrecto
8
correct • correcto
correct • correcto
BEKOMAT 13, 13 CO, 13 CO PN25, 13 CO PN40
english
Note: Minimum height of
installation
The inflow point must be located lo-
wer than the lowest point of the col-
lecting tank or vessel.
Note: Continuous slope
The feed line must always be laid with
a continuous downward slope. If the
space for installation is too restricted,
the lower feed line must be provided
with a separate venting line.
Note: Venting line
In the case of large condensate quan-
tities, it will always be necessary to
install a separate venting line.
Note: Continuous slope
It is important to avoid water pockets
when using a pressure hose as a feed
line!
Note: Continuous slope
Water pockets must also be avoided
when laying a feed pipe.