Use And Maintenance; Qualified Personnel - Gaspardo DAMA 250 Mode D'emploi Et Entretien

ENGLISH
De¿ nitions:
Below is a list of de¿ nitions of the main terminology used in this Manual. Read these de¿ nitions carefully before consulting the Ma-
nual.
• OPERATOR: ................................................ The person/s charged with installing, starting up, adjusting, carrying out maintenance,
• DANGER ZONE: .......................................... any area inside a/o near a machine in which the presence of an exposed person consti-
• DANGER CONDITION: ............................... Any condition in which an operator is exposed to one or several risks.
• RISK: ............................................................ A combination of likelihood and seriousness of possible injuries or damage to the ope-
• PROTECTIONS .......................................... Safety measures consisting in installation of speci¿ c technical systems (guards and safety
• GUARD: ....................................................... An element on the machine which is used in a speci¿ c way to protect the operator by
• EXPOSED PERSON:................................... Any person who happens to be completely or partially in a danger zone.
• USER: .......................................................... The user is the person or the organization or the ¿ rm which has purchased or rented the
• QUALIFIED PERSONNEL: ......................... Those persons who have been specially trained and quali¿ ed to carry out interventions
• TRAINED PERSONNEL: ............................. These are operators that have been informed or trained on the operating tasks and relating
• AUTHORIZED SERVICE CENTER: ............ The authorized Service Center is a structure legally authorized by the manufacturer
Responsibility
The Manufacturer declines any direct or indirect responsibility in the following cases:
- incorrect machine operation for non-intended uses;
- machine operation by unauthorised operators who have not been trained and do not have a driving license;
- non-performance of scheduled maintenance;
- unauthorised changes or work;
- installation of non-genuine and speci¿ c spare parts;
- non-observance, either total or partial, of the instructions provided in this manual;
- non-observance, either total or partial, of the instructions provided in this manual;
- failure to apply regulations on safety, hygiene and health at work;
- unscheduled and unpredictable events.
• Minors, illiterates and persons under altered physical or psychological conditions must not be allowed to operate the machine.
• Operators who do not have a suitable driving license, or who are not properly informed and trained, must not be allowed to operate
the machine.
• The operator must check that the machine operates correctly, and must replace and repair parts subject to wear that may cause
damage.
• The customer should instruct personnel on accident risks, on the operator safety devices provided, on noise emission risks and on
general accident prevention regulations provided for by the international directives and by the law in the country in which the machines
are used.
• In any case, the machine should be used exclusively by skilled operators who will be held to follow scrupulously the technical and
accident-prevention instructions in this manual.
• The Customer is responsible for ¿ nding and selecting the category of suitable PPE (Personal Protection Equipment).
• The machine features pictograms which the operator must keep in perfect readable conditions. When no more readable, they must
be replaced as instructed by European regulations.
• It is the user's responsibility to check that the machine is operated only in optimum conditions of safety for people, animals and property.
• Any change made on the machine without authorisation relieves the Manufacturer from any and all responsibility for damage to objects
or injuries to operators or third partiesi.
The Manufacturer declines any and all responsibility for possible incorrect information in this manual if it is due to printing, translation
or transcription errors. If the Manufacturer deems it necessary to provide the Customer with any additional information to the instruction
provided in this instruction manual for operation must be stored with the manual which it is an integral part of.
44

USE AND MAINTENANCE

cleaning, repairing or transporting a machine.
tutes a risk for the safety and health of that person.
rator's health in a danger condition.
devices) to protect operators against dangers.
means of a physical barrier. Depending on its construction, it can be a shroud, a cover,
a shield, a door, a fence, a guard, a segregation unit, etc.
machine and intends to use it for the purposes it was conceived for.
of maintenance or repair requiring a particular knowledge of the machine, its functioning,
safety measures, methods of intervention - and who are in a position to recognize the
potential dangers when using the machine and are able to avoid them.
risks.
which disposes of personnel specialized and quali¿ ed to carry out all the operations of
assistance, maintenance and repair - even of a certain complexity - found necessary to
keep the machine in perfect working order.
ATTENTION
-
cod. G19502891