Conformity Declaration - CAME AMICO Série Manuel D'installation

Installer's stamp
Job performed _____________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
Installer's stamp
Job performed _____________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
9 Phasing out and disposal
CAME cancelli automatici s.p.a. employs a UNI EN ISO 14001 certified and compliant environmental protection system
at its plants, to ensure that environmental safeguarding.
We ask you to keep protecting the environment, as CAME deems it to be one of the fundamental points of its market operations
strategies, by simply following these brief guidelines when disposing.
DISPOSING THE PACKING MATERIALS
The packing components (cardboard, plastic, etc.) are solid urban waste and may be disposed of without any particular
difficulty, by simply separating them so that they can be recycled.
Before actions it is always advisable to check the pertinent legislation where installation will take place.
DO NOT DISPOSE OF IN NATURE!
DISPOSING OF THE PRODUCT
Our products are made using different types of materials
The majority of them (aluminium, plastic, iron, electric cables) can be considered to be solid urban waste
They may be recycled at authorised firms
Other components (electrical circuit board, remote control batteries etc.) may contain hazardous waste.
They must, thus, be removed and turned in to licensed firms for their disposal.
Before acting always check the local laws on the matter.
DO NOT DISPOSE OF IN NATURE!

10 Conformity declaration

CAME Cancelli Automatici S.p.A.
via Martiri della Libertà, 15
31030 Dosson di Casier - Treviso - ITALY
tel (+39) 0422 4940 - fax (+39) 0422 4941
internet: www.came.it - e-mail: info@came.it
Declares under its own responsibility that the equipments for automatic garage doors and gates listed
below:
... comply with the National Law related to the following European Directives and to the
applicable parts of the following Standards.
--- D ---
IRECTIVES
98/37/CE - 98/79/CE M D
ACHINERY IRECTIVE
98/336/CEE - 92/31/CEE E
LECTROMAGNETIC
73/23/CEE - 93/68/CE L V D
OW OLTAGE
89/106/CEE C P
ONSTRUCTION
Reference code to request a true copy of the original: DDF B EN A001C
Operator name
Date of job
Technician's signature
Requester's signature
Operator name
Date of job
Technician's signature
Requester's signature
MANUFACTURER'S DECLARATION OF CONFORMITY
Pursuant to annex II B of the Machinery Directive 98/37/EC
A1824
C D
OMPATIBILITY IRECTIVE
IRECTIVE
D
RODUCTS IRECTIVE
--- S ---
TANDARDS
EN 13241-1 EN 12635
EN 12453 EN 12978
EN 12445 EN 60335-1
IMPORTANT WARNING!
Do not use the equipment specifi ed here above, before completing the full installation
In full compliance with the Machinery Directive 98/37/EC
MANAGING DIRECTOR
Mr. Andrea Menuzzo
EN 61000-6-2
EN 61000-6-3
13