Intended Use; Reference Standards; Technical Features - CAME AMICO Série Manuel D'installation

"CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY"
1 Legend of symbols
This symbol tells you to read the section with particular care.
This symbol tells you that the sections concern safety issues.
This symbol tells you what to say to the end-users.
2 Intended use and application

2.1 Intended use

The A1824 operator is designed to automate swing gates used in residential or condominium settings..
The use of this product for purposes other than those described above and installation executed in a manner other
than as instructed in this technical manual are prohibited.
2.2 Application
Length of gate leaf
Weight of gate leaf

3 Reference Standards

The company CAME cancelli automatici s.p.a. is ISO 9001:2000 quality certified; it has also obtained the ISO 14001 environ-
mental safeguarding certification. Came engineers and manufactures all of its products in Italy.
This product complies with the following standards: EN 12978, UNI EN 954-1, CEI EN 60335-1, UNI EN 12453.
4 Description
4.1 Gate Operator
This product is engineered and manufactured by CAME cancelli automatici s.p.a. and complies with current safety regulations.
Guaranteed 24 months if not tampered with.
The gearmotor is made up of two aluminium alloy half shells housing the Encoder gearmotor – which features an electric blocking
mechanism – and an epicyclical reduction system with endless screw.

4.2 Technical features

Control board power supply: 230V A.C. 50/60Hz
Motor power supply: 24V D.C.
Max draw: 4A
Power: 100W
Adjustable thrust:400÷2000N
Opening time (90°): Adjustable
Gear ratio: 1/36
Duty Cycle: Intensive use
Protection Rating: IP44
Weight: 7,5 kg
2
"IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS"
"THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS"
1 m 1,5 m
250 kg 215 kg
1,8 m
200 kg