Table des Matières
Publicité
18
W
ashing Option
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set
manually
1
Press the AUTO OFF (POWER) button to turn power on.
2
3
Press the WATER LEVEL button, to control the WATER LEVEL
according to the amount of laundry. If you do not choose anything, it is
set the Large WATER LEVEL automatically.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the Detergent and close the lid.
Note
• When a Wash, Wash/Rinse or Rinse only option is selected, the water will not be drained off after
the wash is completed.
• If you do not specify the WATER LEVEL, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
Wash , Wash+Rinse , Rinse , Rinse+Spin , Spin only options
• Press the PROCESS button until above Option Washing
light is on. (reper to p11)
• When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the power.
(reper to p10)
Publicité
Table des Matières
