Setting Date; Selecting A Device Connected To The Wtw Control; Factory Settings Wtw Control; Description Of Operation; Manner Of Use - Brink WTW control Mode D'emploi

3.2.3 Setting date

You can set the date. The date is visible on the main screen.
Perform the following actions to set the date (see
Press return as many times as necessary to get to the
2
main screen
Press . 'User Menu' opens
1
Select 'User Settings' by turning
Press . 'User Settings' opens
1
Select 'Date' by turning
Press . 'Date' opens
1
Change the day by turning
Press 1
Repeat the previous two steps for both the months and
the year

3.2.4 Selecting a device connected to the WTW control

You can choose the device you want to regulate with the con-
trol if multiple devices are connected to WTW control. For this
you press the device selection button

3.2.5 Factory settings WTW control

It is possible to set all the WTW control's settings back to the
factory settings. Perform the following actions for this:
Remove the operational module from the wall bracket
(see 4 )
Keep 1 pressed down (see
Place the WTW control back in the wall bracket while
keeping pressed down (see
1
"Parameter Reset"
4 Description of operation:
manner of use
You can increase or decrease the ventilation mode with the
WTW control. You can do this by setting a program. You can
temporarily override the program while it is running.

4.1 Navigation: general description

Navigating through menus
The WTW control has menus that you can navigate through.
For this you use navigation button
through the menus by turning the navigation button. You can
open a selected menu-item by pressing the navigation button.
Return to the main screen
The main screen (see ) is the WTW control's start screen.
2
You can always return to the main screen by pressing on the
info button (see ) a few times. The number of times you
2 1
need to press return depends on how deep you have gone
into the menu. U need not be afraid of pressing return too
frequently.
4.2. Selecting a device connected to the WTW
control
You can choose the device you want to regulate with the con-
trol if multiple devices are connected to WTW control. For this
you press the device selection button

4.3 Weekly programmes: P1, P2 and P3

You can programme the regulation of the ventilation mode in
a weekly program. You can choose from programs P1, P2 and
P3.
1 ):
1
1
1
3 (see ).
1 )
7 ). The display will show:
1
(see ). You scroll
1
(see 1 ).
3
Program P1
With this you create a day program for every day of the week.
Program P2
With this you create two day programs. One day program
for weekdays 'mo-fri' and one day program for the weekend
'sa-su'.
Program P3
With this you create seven day programs. Separately for every
day of the week.

4.3.1 Standard settings P1, P2 and P3

The WTW control has standard set weekly programmes. You
4.3.2 Creating a P1 program (see
Press return as many times as necessary to get to the
2
main screen
Press . 'User Menu' opens
1
Select 'User Settings' by turning
Press . 'User Settings' opens
1
Select 'Periods' by turning
Press . 'Periods' opens
1
Select 'P1: week' by turning
Press 1 , 'P1: week' opens
You have a choice from 'Period 1', 'Period 2', 'Period 3', 'Period
4', 'Period 5' and 'Period 6'. Every period is a part of the day in
which you can set a ventilation position.
Perform the following actions to set period 1:
Select 'Period 1' by turning
Press , 'Period 1' opens
1
Select 'Start Time' by turning
Press , 'Start time' opens
1
Change the start time by turning
You have a range of between 3.00u and 2.59u
Press 1
Now set the ventilation mode for period 1.
Perform the following actions for this:
Select 'Vent mode' by turning
1
Press , 'Vent mode' opens
Set the ventilation mode for period 1 by turning
1
Press
You have set the ventilation mode for period 1 You can set
period 2 through 6 in the same manner. A period ends when a
new one starts.
4.3.3 Creating a P2 program (see
Press return 2 as many times as necessary to get to the
main screen
Press . 'User Menu' opens
1
Select 'User Settings' by turning
Press . 'User Settings' opens
1
Select 'Periods' by turning
Press 1 . 'Periods' opens
Select 'P2: week/weekend' by turning
Press , 'P2: week/weekend' opens
1
8
1 )
1
1
1
1
1
1
1
1
1
)
1
1
1