Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - VESTEL KSE 1500 A+ Guide D'utilisation

TRANSPORTATION AND CHANGING OF INSTALLA-
PART- 5.

Transportation and changing of installation position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow
the instructions for transportation on the package for re-transportation.
• Remove
accessories, vegetable bins etc.) or fix
them into the fridge against shocks using
bands during
transportation.
Carry your fridge in the upright position.
PART- 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly,it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your refrigerator does not operate ;
Check that ;
• There is no power,
• The general switch in your home is not disconnected ,
• The thermostat setting is on "•" position,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly ;
Check that ;
• You have not overloaded the appliance ,
• The doors are closed perfectly ,
• There is no dust on the condenser ,
• There is enough place at the rear and side walls.
If there is noise ;
The cooling gas which circulates in the refrigerator circuit may make a slight noise(bubbling
sound) even when the compressor is not running. Do not worry this is quite normal. If
these sounds are different check that ;
• The appliance is well levelled ,
• Nothing is touching the rear ,
• The stuffs on the appliance are vibrating.
movable parts
re-positioning
TION POSITION
(shelves,
and
EN - 27 -