Stopping The Motorcycle And The Engine - Husqvarna TE 310 2010 Guide D'utilisation Et D'entretien

STOPPING THE MOTORCYCLE AND THE ENGINE

- Close the throttle (1) completely so that the engine will help
slow down the motorcycle.
- For normal braking, gradually apply both front and rear
brakes while down shifting (for maximum deceleration, ap-
ply the front and rear brakes firmly).
- When stopped, pull the clutch lever and shift gear lever (2)
in neutral position.
- Press the engine stop RED button (3).
- TC-TXC: close the fuel cock (4).
- TE-SMR: turn towards left the ignition key.
WARNING*: Independent use of the front or
rear brake may be advantageous under
certain conditions. Use caution when using
the front brake, especially on slippery sur-
faces. Improper use of the brakes can lead
to a serious crash.
TE-SMR
WARNING*: In the event of stuck throttle or
other malfunction which causes the engine
to run uncontrollably, immediately depress
the engine stop button and hold it down.
Control the motorcycle by normal use of the
brakes and steering while holding the en-
gine stop button down.
TC-TXC
TE-SMR
TC-TXC
4
27