Whirlpool HYBRIDCARE Instructions D'installation page 18

6.
Remove latch
Thin section
Thick section
Flip and rotate the inner door 180° so that the thin section is
at the top and the thick section is at the bottom. Using a T25
screwdriver, remove the four screws securing the latch plate
in place.
7.
Reinstall latch on opposite side
Using a T25 screwdriver, reinstall the latch plate on the
®
opposite side from which it was removed with the four screws
removed earlier.
18
Latch
Flip over the inner door to the left. Using a T20
reinstall the hinge assembly on the opposite side from which
®
it was removed.
DOORS WITH LCD SCREEN:
Lift off inner door assembly. Using a Phillips screwdriver,
remove the two screws securing the rotating assembly
to the door.
8.
Reinstall hinge assembly on opposite side
9.
Remove rotating assembly
screwdriver,
®