Service Technician Maintenance - Zodiac Jandy Pro VS FloPro Serie Manuel De Fonctionnement Et D'installation

Page 20
ENGLISH
6.1

Service Technician Maintenance

This pump must be serviced by a professional
service technician qualified in pool/spa installation.
The following procedures must be followed exactly.
Improper installation and/or operation can create
dangerous electrical hazards, which can cause high
voltages to run through the electrical system. This
can cause property damage, serious personal injury,
and/or death. Improper installation and/or operation
will void the warranty.
Blocked Impeller
Before servicing the pump, switch off the circuit
breakers at the power source. Severe personal injury
or death may occur if the pump starts while your hand
is inside the pump.
1. Turn off the pump. Switch off the circuit breaker to
the pump motor.
2. Remove the lid and basket.
3. Look inside the pump for debris. Remove any
debris found inside.
4. Replace the basket and lid.
5. Switch on the circuit breaker to the pump motor.
6. Turn on the pump, and see if the problem is solved.
7. If the impeller is still blocked with debris and it
is not possible to remove the debris using Steps 2
through 4, the pump will need to be disassembled in
order to access the inlet and outlet of the impeller.
Jandy Pro Series VS FloPro™ Series Variable-Speed Pump
®
CAUTION
WARNING
|
Installation & Operation Manual