Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
Because the machine distributes hot air, please don't place or operate in a narrow place.
2.
In case of dangerous leak, don't work the machine in a humid place.
3.
Don' t place the machine in a sunlit corner otherwise the unit might shut down due to the overheat
and the color of the m achine may soon fade out.
The unit is fitted with a special thermal cut off device.
Please ensure the unit is not placed against objects which will obstruct air intake e.g. furniture or
curtains as this will affect it's performance dramatically.
Problem
Cause
Electrical short on both
E1
temperature sensor and PCB
Electrical short of temperature
E2
sensor copper tube and PCB wiring
Indicates water tank full or possibly
E4
the incorrect wiring of plug
(CE) N 842/2006:
R410A is a kind of fluorinated greenhouse gases covered by the Kyoto Protocol.Its
total global warming potential (GWP) 1975
GB
Trouble shooting
Contact an electrician for repair
Contact an electrician for repair
User needs to pull out the rubber stopper
which is located at the bottom of the unit,
to drain the water away. Check that the plug
has been wired correctly.
72
Publicité
Table des Matières
