switel DE38 Série Mode D'emploi page 68

Icons in the display
a
On: Connection to the base station exists
Flashing: No connection to the base station
k
On: Indicates the battery capacity
Flashes: While handset is in the base station:
Batteries are being charged
n
On: Batteries need to be charged
Flashing: Batteries must be charged immediately
c
On: A call is in progress
Flashing: A call has been received
j
The ringing tone has been switched off
f
On: An alarm time has been set
Flashing: The set alarm time has been reached
h
The key lock function is switched on
i
Messages recorded in the mailbox set up by your
telephone network provider
b
On: Internal call is in progress
Flashing: Internal call has been received
o p
More digits/characters to the left or right of those currently
displayed. Press the relevant softkey to scroll to them.
The functions assigned to the respective softkeys are displayed in the
bottom line of the display; the functions available vary according to the
current operating status.
q
Open the menu
r
Confirm the setting
b
Make an internal call (only when several handsets are
registered on a base station)
u
Back to the previous menu or cancel programming
v
Scroll back to delete characters during entry (press briefly
to delete last character, press longer to delete entire line);
switch muting function on/off during a call.
Standby mode
All descriptions in this operating manual assume that the handset is in
Standby mode. Switch the system to Standby mode by pressing the
button.
Low−radiation operation (ECO mode)
In Call mode, the radiation is reduced considerably as com-
pared to standard, cordless DECT telephones.
7
F