Planning The Installation - CONVECTAIR APERO 7359 Série Notice D'utilisation

1
Introduction
Dear owner,
- Congratulations on the purchase of this new premium electric heater from
CONVECTAIR, manufacturer of the highest quality heating product in the
electrical industry.
- To obtain the best results and the ultimate in performance and comfort please
carefully read the installation and maintenance instructions shown in this
manual.
2

Planning the installation

1-
Choose the location where the
CONVECTAIR will be installed.
2-
Check that nothing such as
drapes or furniture interferes
with the airflow to and from the
CONVECTAIR ; see required
clearances (Figure 1).
3-
Make a note of the minimum
required clearances for this
heater and ensure that there are
no restrictions before choosing
the location.(see Figure 1).
DO NOT COVER THE HEATER
The above logo warns of a risk : do
not cover.
Do not cover or obstruct the air intake or outlet on the unit as this could
cause overheating and damage the heater.
2.
IMPORTANT :
4 100 mm
" -
4 " 100 mm min.
-
Figure 2
Figure 1
20
"
520 mm