Sound Settings; Spdif Output; Setting The Time; Setup Menu - Samsung 7 Serie Guide De L'utilisateur

Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of simultaneous
transmission of many audio tracks (for example,
simultaneous translations of the program into foreign
languages).
✎
You can only select a language among the ones being
broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
Mono : Choose for channels that are broadcasting in
■
mono or if you are having difficulty receiving a stereo
signal.
Stereo : Choose for channels that are broadcasting in
■
stereo.
SAP : Choose to listen to the Separate Audio Program,
■
which is usually a foreign-language translation.
✎
Depending on the particular program being
broadcasted, you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night : This mode provides an improved sound
■
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker, you
should use these settings.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker, you
should use these settings.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
■
t
■
Sound Reset(OK / Cancel)
Reset all sound settings to the factory defaults.
¦
O
Time
✎
■
Audio Format : During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a dolby
digital setup, maximize your interactive 3D sound
experience.
Audio Delay : Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).

Setup Menu

Setting the Time

m → Setup → Time → ENTERE
MENU
The current time will appear every time you press the
INFO button.
Clock : Setting the clock is for using various timer
features of the TV.
✎
If you disconnect the power cord, you have to set
the clock again.
Clock Mode: Set up the current time manually or
automatically.
Auto : Set the current time automatically using the
–
time from a digital channel.
✎
The antenna must be connected in order to set
the time automatically.
Manual : Set the current time manually.
–
✎
Depending on the broadcast station and signal,
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm.
✎
Available only when Clock Mode is set to
Manual.
✎
You can set the month, day, year, hour and minute
directly by pressing the number buttons on the
remote control.
21
English