Irecording; Video Recording - JVC Everio GS-TD1 Guide D'utilisation

Masquer les pouces Voir aussi pour Everio GS-TD1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Recording

Video Recording

You can record without worrying about the setting details by using the Intelligent Auto mode. Settings
such as exposure and focus will be adjusted automatically to suit the shooting conditions.
Before recording an important scene, it is recommended to conduct a trial recording.
Open the
lens cover.
(Wide angle)
.
You can also tap g on the touch screen to record. To stop recording, tap a. In
0
addition, you can also tap T/W to zoom.
Indications during video recording
o
3D/2D Mode
Video Quality
Scene Counter
.
NOTE
If the microphone level is frequently displayed in red, lower the setting in "MIC LEVEL SETTING" such
0
that the display turns green so that more realistic audio sounds can be recorded.
The estimated recording time of the supplied battery pack is approximately 55 minutes during 3D
0
recording (MP4(MVC)) and 1 hour 20 minutes during 2D recording.(p. 31)
Do not remove the battery pack, AC adapter, or SD card when the access lamp is lighted. The recorded
0
data may become unreadable.
For more information, refer to the Detailed User Guide
14
http://manual.jvc.co.jp/index.html/
Select video
mode.
Zooming
(Telephoto)
Check if the recording mode is P
Intelligent Auto.
If the mode is H Manual, press the H/T
button to switch.
The mode changes between Intelligent
Auto and Manual with every press.
(Rear)
+
-
Select 3D or 2D recording mode.
3D recording may be performed when
the LED lights up. (p.16)
10:10AM
0:00:00 [000:22]
Start recording.
Press again to stop.
Recording Media
Battery Indicator
Intelligent Auto Mode
Remaining Recording Time

Publicité

Table des Matières
loading

Table des Matières