Deltafox DG - CGT 2023 Traduction De La Notice D'utilisation Originale page 27

gloves away from moving
parts. Loose clothes, jewellery
or long hair can be caught in
moving parts.
g) if devices are provided for the
connection of dust extraction
and collection facilities, en-
sure these are connected and
properly used. Use of dust
collection can reduce dust-
related hazards.
4) POWER TOOL USE AnD CARE
a) Do not force the power tool.
Use the correct power tool
for your application. The cor-
rect power tool will do the job
better and safer at the rate for
which it was designed.
b) Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
c) Disconnect the plug from
the power source and/or the
battery pack from the power
tool before making any ad-
just -ments, changing ac-
cessories, or storing power
tools. Such preventive safety
measures reduce the risk of
starting the power tool acci-
dentaIly.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of un-
trained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage
of parts and any other con-
dition that may affect the
power tool's operation. If
damaged, have the power tool
repaired before use. Many ac-
cidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less Iikely to bind
and are easier to control.
g) Use the power tool, acces-
sories and tool bits etc.
in accordance with these
instructions, taking into ac-
count the working condi-
tions and the work to be per-
formed. Use of the power tool
for operations different from
those intended could result in
a hazardous situation.
h) Ensure that the vents are free
of soiling.
i) Remove the battery pack
from the power tool
- whenever the user no longer
remains in the vicinity of the
machine.
- before the removal of block-
ages.
- before checking, cleaning or
working on the machine.
- after touching a foreign body in
order to check the machine for
damage.
- for an immediate check if the
machine begins to vibrate ex-
cessively.
GB
27