Maintenance And Storage; Residual Risks - Deltafox DG - CGT 2023 Traduction De La Notice D'utilisation Originale

or wrongly mounted protective
devices or parts of the cutting
device.
• Before commissioning and
after any impacts, check for
signs of wear and damages,
and have any necessary repairs
performed.
OPERATiOn
• Wear safety goggles, stable
shoes and long trousers over
the entire period of use of the
machine.
• The use of the machine under
bad weather conditions, espe-
cially in case of lightning risk,
must be avoided.
• Warning! Do not touch any
moving dangerous parts be-
fore the battery has been
removed and the moving dan-
gerous parts have come to a
complete stop.
• Caution, risk of injury from cuts
on hands and feet.
• Stop using the machine when
persons, above all children, and
house pets are in the vicinity.
• Use the machine only in day-
light or with good artificial light-
ing.
• Always keep your hands and
feet away from the cutting
equipment, above all when you
switch the motor on.
• Never install metallic cutting
elements.
• Never use the machine with
damaged or missing protective
equipment.
• Avoid an abnormal body pos-
ture. Ensure secure footing at
all times to maintain balance
when working on slopes.
• Go slowly. Do not walk with
the device in your hand.
• Always wear sturdy shoes and
long trousers during operation
of the machine.
• in the case of an accident
or malfunction during op-
eration, the device must be
switched off immediately. in-
juries must be properly treat-
ed or medical assistance
sought. Read the „Trouble
shooting" section to correct
any malfunctions or contact
our Service Centre.

MAinTEnAnCE AnD STORAGE

• Remove the removable battery
before carrying out mainte-
nance or cleaning work.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
• The machine must be checked
regularly and maintained. Have
the machine repaired in a li-
censed workshop.

Residual risks

Even if properly operating and
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this elec-
tric tool may present the following
hazards:
a) Cuts
b) Ear damage if working without
ear protection.
c) Damage to your health caused
by swinging your hands and
arms when operating the ap-
pliance for longer periods of
GB
29