Technical Data; Safety Instructions; Symbols And Icons - Deltafox DG - CGT 2023 Traduction De La Notice D'utilisation Originale

GB
Refer to the following descriptions for a
functional description of the controls.

Technical data

Cordless Grass Trimmer
........................................... DG-CGT 2023
Motor voltage (U) .............. max. 20 V
Idling speed ................ 8000 min
Protection Class ................................. III
Protection category ........................IPX0
Runtime ............................... ca. 60 min*
Cutting circle ............................ 230 mm
Weight (without battery charger) 2.02 kg
Sound pressure level
(L ) ................. 74 dB (A), K
pA
Sound power level (L
guaranteed .......................... 92 dB (A)
measured . 90.28 dB (A); K
Vibration (a ) ..... 3.436 m/s
h
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity. The vibration and noise
measuring processes in accordance with
EN 50636-2-91, were completed suc-
cessfully.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
24
(rpm)
-1
= 2.5 dB
pA
)
WA
=0.40 dB
WA
; K=1.5 m/s
2
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting
the working hours. For this pur-
pose all parts of the operating cy-
cle have to be considered (for ex-
ample, times when the electric tool
is switched off and times when it
is switched on but running without
any load).
2

Safety instructions

Ensure that the safety instructions
are observed when operating the
trimmer.

Symbols and icons

Symbols on the trimmer
WARNING!
Carefully read these Operat-
ing Instructions.
After turning off the ap-
pliance, the cutting disk
will keep revolving for a
couple of seconds. Keep away
from your hand and feet.
Wear goggles
and ear defenders.